Inon has announced a new version of their X-2 housing for the Canon EOS 6D. It features an ergonomic design and full compatibility with Inon’s existing lens port system. The X-2 series are made from cast aluminum, rather than machined, which gives weight savings and the ability to mould metal into curved shapes.

The housing will be released on August 4th, 2015 on BTO (build-to-order) basis.

Press Release

X-2 for EOS6D

INON INC. has offered time-proven X-2 housings and is pleased to announce official releases of new lightweight cast body housing model for Canon full frame D-SLR camera EOS 6D as very first full frame version in X-2 series on August 4th, 2015 at build to order (BTO) base. ###X-2 for EOS6D
The Canon EOS 6D is Canon’s most compact full-frame digital SLR delivering incredible image quality with many of advanced features including newly designed 20.2 Megapixel Full-Frame CMOS sensor.

The INON X-2 for EOS6D housing is built on the concept of Professional and Lightweight for professional image quality, high mobility underwater and superb cost effectiveness in compact and lightweight body. Buttons and levers on the housing are carefully located as much as like camera’s control itself for intuitive operation underwater. You never miss shooting opportunity. INON offers an underwater camera system in total with strobe, viewfinder, MRS Port, LED flashlight and wide range of arm products all from INON for fast and smooth underwater photography/videography.

Product features.

• Lightweight and Compact Ultra precise Cast Aluminum Body.
  The X-2 for EOS6D is made from corrosion resistance aluminum alloy by ultra precise cast manufacturing technique to fuse design, weight and durability in higher dimension. The cast manufacturing technique enables thin body plate with complicated curved design which is not possible with machining. Lightweight and durable aluminum alloy body has acquired reliability, durability and controllability even in severe underwater.
• Stress-free Control Layout to Capture the Moment.
  Cast manufacturing allows flexible design to put various ingenuities for trouble-free underwater operation as like controlling camera on land, where your right thumb and mid finger securely hold a housing without effort, index finger can naturally access to the shutter release lever and aperture or shutter speed can be easily adjusted without seeing those dials during checking composition through the viewfinder. The INON X-2 for EOS6D pursues intimate controllability to “capture the moment” in addition to accessibility to all necessary controls/dials for underwater photography/videography (5). (5) 「Quick control button」, 「Multi-controller」 and 「Multi function lock switch」 are not accessible.
• Proven and Reliable Waterproof Design.
  Buttons, dial levers are not directly attached on the aluminum alloy housing body but installed via brass bearings to prevent the aluminum housing body from galling caused by sliding of buttons and movement of dial levers to secure waterproof property. Only minimum parts replacement can refresh these controls even you need to change bearings. Buttons and dial levers carry oil bearing type INON yellow O-rings to prevent accidental flooding due to lack of grease. Also their size is thicker than required to enhance waterproof property.
• Optical Flash Trigger.
  Equipped with a built-in circuit (6) to convert sync signal transmitted from camera’s hot shoe to optical signal. The unit triggers an external strobe by LEDs underneath of the Optical D Connector. Flooding-free fiber optics connection is supported to benefit simple yet reliable external strobe shooting simply by plug-in 「Optical D Cable Type L」. Different length of Optical D Cable products like Optical D Cable L Type L (68cm/27in) or Optical D Cable LL Type L (110cm/43in) expand application of strobe shooting such as off-camera strobe shooting. (6) The Optical Flash Trigger converts electrical strobe trigger signal from camera hot-shoe into LED flash (once) but does not support TTL Auto exposure or pre-flash system. Compatible flash mode of an external strobe is 「External Auto」 and 「Manual」. When using INON Z-240, D-2000 series, S-2000 or D-180 series, it is necessary to deactivate Advanced Cancel Circuit (push and lock the switch/insert the magnet) to accommodate with non pre-flash type camera.

• Interchangeable Four Viewfinders.
  INON offers four different finder units; Finder Window Unit, Pick-up Finder Unit 3, 45° Viewfinder Unit (7), Straight Viewfinder Unit (8) to accommodate with various subjects/shooting conditions as like selecting camera lens. (7) Finder corners may get slightly dark.
  (8) As the Straight Viewfinder is originally designed for APS-C format, using for a full frame camera will have blind section on the center of the upper edge and either left or right edge may have slight blind section as well.
• Wide Variety of Lens Port to Support from Ultra macro to Fish-eye Imaging.
  Wide variety of lens system are supported such as EF50mm F2.5 Compact Macro, EF100mm F2.8L Macro IS USM for macro, EF8-15mm F4L Fisheye USM for both circular and rectilinear fish-eye and EF16-35mm F2.8L II USM for ultra wide imaging so on. All compatible lens ports use optical lens (multi-coated) to exploit high image quality captured by EOS 6D. Macro lens operation can benefit INON unique MRS Port system turning lens barrel by magnetic attraction where you can control focusing without mechanical stress as like to adjust focusing by focusing ring directly on land.